Setup WebTV for Thrift Internet
To setup your WebTV to connect to Thrift Internet go to the Dialing Options Screen. There are two ways to get to this screen:
Method 1: With the WebTV turned on and already connected to the internet, on the Home screen, click onto Setup. Then click Dialing Options.
Method 2: With the WebTV unit turned off, press the Option key three times, then type 2 1 7. The lights on the WebTV unit should flash quickly after this. Then, when the unit is turned on, it should go directly to the Dialing Options screen.
Once you are at the Dialing Options screen, choose Use your ISP.
Read through the next 3 screens and choose Continue on each.
On the next page, choose the option to Use your ISP.
On this screen, check the box at the top. If this box is not checked, you cannot enter the information that you need to use Thrift Internet as your ISP.
- Type Thrift Internet for the Service provider name.
- Enter your Thrift Internet dialup username in the Login name box.
- Enter your Thrift Internet password in the Password box.
- Type your Local Access Number into the Modem dial-in number.
- If you have a second local access number, type it in the Backup
dial-in number box. If not, leave this box blank.
When you have entered the information, click Done.
A message should pop up saying that Your Internet terminal needs to reconnect for your changes to take effect. Click Continue.
If the WebTV unit was already connected, it will hang up and reconnect to a toll-free WebTV to tell WebTV that you will be using an ISP.
The unit will then give you the option to Use your ISP. When you click this option, it will disconnect from the toll-free number and dial the Thrift Internet local access number.
When the WebTV home page is displayed, you have successfully configured your WebTV.
|